Registering A Projector - Epson PowerLite 6110i User Manual

If you've added the program to the Startup programs folder, it may
already be open. If so, click the icon in the system tray on the
lower-right corner of your screen to display the EMP Monitor
window:
To close EMP Monitor, select
the program icon shown above, then select

Registering a Projector

Before you can monitor a projector, you have to register it. Follow
these steps to automatically search for your projector(s).
1. Open EMP Monitor.
2. Select
Edit > New > Projector (automatic search)
3. Click to locate projectors currently operating on the
Search
network.
4. Select the projector you want to add by clicking its name, then
click the button.
Edit
5. Enter a Display name, select a Parent group, if necessary, enter a
Monitor Password, if necessary, and a Description for the
projector.
6. Click the
Register
7. To register additional projectors with EMP Monitor, repeat steps
2 through 6.
8. When you're done adding projectors, click
screen with a list of all registered projectors.
Click here to start EMP Monitor
from the File menu or right-click
Exit
Exit
button.
.
.
. You see a
Cancel
Monitoring the Projector Over a Network
note
If the projector is not
automatically found, your
projector may not be
connected or configured
correctly for the network. See
page 75.
To delete a projector from
the list, right-click the
projector name, and click
.
Delete
79