Epson PowerLite 6110i User Manual page 62

Configuring the Projector
62
■ Air Filter Setting
Lets you turn the air filter replacement
Alarm Timer:
notification on or off. If you are using the smoke air filter,
make sure this setting is turned
Lets you change the amount of time the projector
Timer:
waits before displaying the air filter replacement notification.
When this setting is enabled, the projector
Clean Notice:
displays a message when the air filter is clogged with dirt or
dust.
Clean Notice Timing:
which the cleaning notice is displayed. If the projector is
being used in a dusty environment, set this setting to
.
(Early)
■
Projector ID
Lets you assign a numeric ID to each projector. When you are
using multiple projectors, you can use the ID to select the one
you want to operate with the remote control. See page 47 for
instructions.
■
Multi-screen
Lets you set individual IDs for multiple projectors
Screen ID:
when performing Image Correction adjustments. This allows
you to use one remote control for all of the projectors. To
select a projector, press and hold the
remote control while pressing the number button that
corresponds to the projector's Screen ID.
Image Correction
Adjustment Level:
one at a time and adjust the Brightness Correct and Color
Correct settings until the projected images match on all of
the projectors.
Brightness Correct:
brightness for each projector.
Lets you adjust the difference in color for
Color Correct:
each projector.
.
On
Lets you select from five intervals at
button on the
Num
Select each Adjustment Level (1 to 5)
Lets you adjust the difference in
Level 1