Displaying Your Screen Logo - Epson PowerLite 6110i User Manual

note
Once you've saved a User's
Logo, you cannot reset the
logo setting to its factory
default (no logo).
note
If the User's Logo Protect
feature has been enabled, the
Display Background setting
cannot be changed. You will
need to turn the protect
function off first. See
page 70 for details.
Configuring the Projector
68
7. When you see this screen, select a zoom rate (display size), and
press .
Enter
8. When you see the message
, select
Logo? Yes
moments. Do not use the projector or other sources (computer,
video, etc.) while the logo is being saved.
9. When you see the message

Displaying Your Screen Logo

Follow the steps below to display your logo when there is no signal,
when the projector is turned on, and when the A/V Mute button
is pressed:
1. Press the button on the remote control, select the
Menu
menu, and press
Enter
2. To display your logo when the projector is not receiving a video
signal, select
Display Background
3. Select and press
Logo
4. Press the button on the remote control to return to the
Esc
Display menu.
5. To display your logo when the projector is turned on, select
and press
Startup Screen
6. Select , then press the
On
7. Press the button on the remote control to return to the
Esc
Display menu.
Save this image as the User's
and press . Saving the logo takes a few
Enter
, press
Completed
.
and press
.
Enter
.
Enter
button.
Enter
.
Esc
Display
.
Enter