Epson PowerLite 6110i User Manual page 61

■
User's Logo
Turn this setting
On
captured whenever the projector is turned on. See page
page 66 for more information.
■
Projection
Projector is in front of the screen.
Front:
Projector is in front of the screen, mounted
Front/Ceiling:
upside-down from the ceiling.
Projector is behind the screen.
Rear:
Projector is behind the screen, mounted
Rear/Ceiling:
upside-down from the ceiling.
■ Operation
Direct Power On:
starts as soon as you plug in the power cord. You don't have
to press the P
Power
When this feature is enabled, the projector's
Sleep Mode:
lamp automatically turns off when the projector has not
received any input signals for more than 30 minutes. This
conserves electricity, cools the projector, and extends the life
of the lamp. To resume projecting, press the P
button.
Sleep Mode Timer:
enabled, you can set the period of time before the projector
turns off automatically, from 1 to 30 minutes.
High Altitude Mode:
projector above an altitude of 4,921 feet (1,500 meters). This
setting ensures that the internal temperature of the projector
is regulated properly. Turn this setting off for lower
elevations.
■ Standby Mode
Select
Network On
control functions while the projector is in standby mode (the
P Power light is orange).
to display the image or logo you have
When this feature is enabled, projection
button.
When the Sleep Mode setting is
Turn this setting
On
to use the network monitoring and
note
When Direct Power On is
enabled, press the P
button to turn the projector
off, wait until the P Power
light remains solid orange,
then unplug the projector.
Power
when using the
Configuring the Projector
Power
61