3. While holding the
remote control (0 through 9) to select the desired ID. Select zero
to control all projectors, or select a number to match the ID of the
projector(s) you want to operate.
After setting the ID, you can check whether the remote control works
with a specific projector:
1. Point the remote control at the projector you want to check.
2. Press the
button on the remote control. You see a message on
ID
the screen like one of these:
If the message says the remote control is "On," then you can use
the remote control to operate that projector. If it says "Off," then
you have to change the ID of the remote control and/or projector
before operation is possible.
button, press a numbered button on the
ID
Using the Remote Control
49