Epson PowerLite 6110i User Manual page 67

3. Use the pointer button to highlight
the button.
Enter
4. When you see the message
, select
Logo? Yes
the image.
5. Use the pointer button on the remote control to select the
area of the image you want to use. Once you have selected the
area, press .
Enter
6. When you see the message
press .
Enter
If you want to change the area selected, select
repeat steps 4 through 6.
User's Logo
Choose this image as the User's
and press . A selection box displays over
Enter
Select this image?
, then press
, choose and
Yes
, press and
No Enter
Configuring the Projector
note
If the User's Logo Protect
function is enabled, you see
a message that the logo
cannot be recorded. You'll
need to disable the User's
Logo Protect function before
you can create or change the
User's Logo. See page 70.
67