Connecting An Rgb Video Source - Epson PowerLite 6110i User Manual

Setting Up the Projector
22

Connecting an RGB Video Source

Follow these instructions to connect the projector to a video player
that has an RGB video output port. Depending on the type of
connector on your player, you'll need to use the appropriate cable:
■ If your player has a VGA-style connector, follow the steps below.
If your player has three BNC connectors labeled R/G/B, see
■
"Connecting Using a BNC-to-VGA Cable" on page 23.
Connecting Using a VGA-style Computer Cable
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable between the video port on your player and the
port on the projector.
Computer1
3. If you want to play sound through the projector, see page 27 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image.
5. Once the projector is turned on, enter the projector's Signal menu
and make sure Computer1 is set to ; see page 56.
Auto