Cleaning The Air Filter; Replacing The Air Filter - Epson PowerLite 6110i User Manual

Cleaning the Air Filter

Clean the air filter when you see any of the following messages:
air filter is clogged. Clean or replace the air filter
Replace the air filter.
cause overheating and damage the projector.
Follow these steps:
1. Turn off the projector and unplug the power cord.
2. To clean the filter, Epson recommends using a small vacuum
cleaner designed for computers and other office equipment. If you
don't have one, gently clean the filter using a very soft brush (such
as an artist's paint brush).
You can remove the air filter to clean both sides.
3. When you have finished cleaning the air filter, close the cover and
reset the timer as described on page 88.
4. If the dirt is difficult to remove or a filter is broken, replace the
filter as described below.

Replacing the Air Filter

Replace the air filter when you see the
message. Dust clogs prevent proper ventilation and can cause
filter
overheating and damage the projector.
To obtain a replacement air filter, contact your dealer or call Epson at
(800) 873-7766 in the United States to obtain a new one. In Canada,
please call (800) 463-7766 for dealer referral.
Dust clogs prevent proper ventilation and can
Check or Replace the air
The
. or
Check or
note
If the air filter has been
stained by tobacco smoke, it
cannot be cleaned. Replace
the filter as described below.
Maintaining the Projector
87