Changing the Pointer Shape
Follow the steps below to change the pointer shape.
1. Press the
button on the remote control, highlight the
Menu
menu, and press
Settings
You see this screen:
2. Highlight
Pointer Shape
3. Select the pointer you would like to use, then press
select it.
4. When you have finished selecting a pointer shape, press the
button to exit the menu system.
Operating Two or More Projectors with
the Remote Control
If you're using more than one projector, you can control all the
projectors—or just selected ones—by using the projector ID system.
To operate a projector, you have to set the remote control's ID to
match that of the projector. Or you can control all the projectors at
once by setting the remote control's ID to zero.
.
Enter
and press
.
Enter
to
Enter
Menu
Using the Remote Control
47