Viewing Lamp Usage And Other Information - Epson PowerLite 6110i User Manual

Light Status
Red
Flashing red
Red
Flashing red

Viewing Lamp Usage and Other Information

Use the Info menu to view information about the image source, the
display settings of your computer, and the number of hours the lamp
and filter has been used.
Press the button, select
Menu
You see the lamp and air filter usage hours and various input signal
settings on the right:
The lamp typically lasts about 4000 hours. If the number shown is
close to that, make sure you have a spare lamp handy. If you've
installed a new lamp, be sure to reset the lamp timer (see page 91).
Description
The lamp may be burned out. First make sure the lamp cover is securely
installed. If that's not the problem, remove the lamp and replace it as
described on page 89. If this does not resolve the problem, contact
Epson as described on page 106.
The lamp may be cracked or installed incorrectly. Check the lamp; if it is
cracked, you must replace it (as described on page 89) before you can
use the projector again.
If checking the lamp installation and replacing the lamp does not solve
the problem, contact Epson as described on page 106.
The projector is shut down automatically because of an internal problem.
Remove the power cord and contact Epson for help, as described on
page 106.
, then press
Info Enter
.
note
The information displayed
depends on the input signal
Lamp usage
currently selected.
Filter usage
Solving Problems
97