Setting Up the Projector
20
Connecting an S-Video Source
1. Locate an S-Video cable (one may have been provided with your
video equipment, or you can purchase one from Epson; see
page 14).
2. Connect the cable between the S-Video connector on your player
and the
connector on the projector:
S-Video
3. If you want to play sound through the projector, see page 27 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.