Back Panel - Mitsubishi Electric HD-6000 Owner's Manual

Back Panel
1. 2. 3. 4. 5. 6. 7. 8.
1. IR Emitter°NetCommand ®
Two jacks are provided for connecting IR emitters. JR
Emitters connected to these jacks are used by the
NetCommand system of the HDTV receiver/controller
to control external analog devices such as VCRs, DVDs,
cable boxes, sateiJite receivers and audio receivers.
2. Input-l, -2
Input 1 and 2 can be used for the connection of a VCR,
Super VHS (S-VHS) VCR, DVD player, standard satellite
receiver or other A/V device to the H DTV receiver/controller.
When connecting the video, you must choose to connect to
either S=VIDEO or VIDEO. They cannot both be connected
at the same time.
3. MonitorLink/TM HDMP M Output
The HDMI (High Definition Multimedia Interface) supports
uncompressed standard and high definition digital video
formats and existing digitaJ multi-channel audio formats.
The HDMI output supports both video and audio using a
single cabJe. HDMI is the preferred connection type. If
you need to send analog audio to an A/V receiver, see
aJso item 7, "Output to Display."
Use this output to connect to an HDMI monitor such as
the LT=4260 fiat panel LCD TV.
4. HDMI Input
Use this input to connect to EIA/CEA-861 compliant
devices such as a high definition cable box, sateilite
receiver or DVD piayer. This input supports 480i, 480p,
720p and 1080i video formats. It is not intended for use
with personal computers or devices outputting video
signals with computer resoJutions.
This input can also be used as a DVl connection with
separate analog audio inputs (see item 6). An optional
HDMI=to-DVI adaptor or cabJe wilI be necessary to make
this connection and may be available from your IocaJ
eJectronics retailer. When using the optional HDMI-to-
DVl adapter, the DVI analog audio inputs on your HDTV
receiver/controiler allow you to receive left and right
audio from your DVI device.
This input is HDCP (High-Bandwidth DigitaI Copy
Protection) compliant.
5. IR Input
This HDTV receiver/controiler has a remote control IR
sensor on the front panel. In some situations it wilI not
be convenient to point the remote controJ at the HDTV
receiver/controilen In this situation, you may place the
included wired IR sensor in a more accessible Jocation.
6. VGA(PC) Input and Audio/DVl Audio
This input can be used for the connection of a 640 x 480
VGA(PC) computer. PJease see Appendix B for signal
compatibility. Stereo audio inputs are atso provided.
Unlike HDMI, DVl does not carry audio information on
the same cable. Use these analog stereo audio inputs
when using the HDMI input with a device that outputs
DVl instead of HDMI. When used with the LT-4260 LCD
HDTV display, this PC input is deactivated and the PC
input on the display is avaiJabJe instead.
7, Output to DispJay (YPrPb with
Use the HD-6000 OUTPUT to Display under the following
circumstances:
No HDMJ input available for your display monitor°
These jacks provide a substitute output if an HDMI
input is unavailable on your monitor. Use them to
send component video to the display monitor and left
13