Mitsubishi Electric HD-6000 Owner's Manual page 50

Edit NetCommand®, Add Devices, continued
6. To erase a barned function, highiight the check box
for that function and press CANCEL.
7. When the function signais have been barned,
press ADJUST _ to sebct Next> and move to the
[Device] Advanced Learn screen. NOTE: When
barning the device's remote controi signais, point
the device's remote controi at the HD-6000.
Hint; if the device's remote control uses a single button
for both Power On and Power Off, don't learn the
Power Off function,
Name Screen
Figure 18
The Name screen allows you to change the defauit
name for each device to a custom name of up to eight
characters (inciuding a biank space), sebcfing from
btters, numbers and nine different characters. Press
ADJUST • or • to sebct each ]etter, then press
ENTER to move to the next position. Press CANCEL
on the remote to debte the current btter and move
back one character position. When in the first position,
the CANCEL button will return the name to the defauit
name.
[Device] Advanced Learn Screen
Figure !7
After learning the basic device keys, the [Device]
Advanced Learn screen allows you to learn any special
keys for your device. Most common IR remote control
signal formats can be learned by NetCommand.
A table of specialized device keys is shown in
Appendix E. You only need to barn the functions your
devices respond to and can ignore the functions that
do not apply to your device.
Figure 17 [Device] Advanced Learn screen
Figure 18. Name screen
Connection for [Device] Screen
Figure 19
This screen allows the HDTV receivericontrolbr to
learn the connection between device(s) and input(s).
Inputs 1 & 2, Components 1 & 2, Input-DTV, VGA
and/or the inputs for the AiV Receiver all need to be
checked, if connected. Add or remove check marks
to indicate what type of connections (Audio, Video or
both) are used with each HDTV receivericontrolbr and
AiV Receiver input.
Figure 19, Connection for [Device] screen
5O