Dvj Device - Mitsubishi Electric HD-6000 Owner's Manual

Connecting a DV[ Device
DV[ Device
Figure 18
A DV/-to-HDM/cable or DVt/HDMI adaptor and HDMI cable and audio cables are required, These are not included with the HDTV
receiver/controlle,c They may be available at your local electronics retailer.
1. Connect the DVPto-HDM[ cable (recommended) (or DV[/HDM[ adaptor with an HDM[ cable) from the DV[ device's
back panel to the HDTV receiver/controller's back panel.
NOTE: If you are using a DV[iHDM[ adaptor, it is important to connect the adaptor to the DV[ side for best
performance.
2. Connect a set of audio cables from AUDIO OUT on the the DV[ device back panel to the DV[ Analog Audio input
on the HDTV receiver/controller back panel. The red cable connects to the R (right) channel, and the white cable
connects to the L (left) channel.
NOTE: The HDM[ connection supports copy protection (HDCP). Some devices require connecting to an analog
input first, in order to view on-screen menus and select DV[ as the oupuL Please review your equipment
instructions for DV[ connectivity and compatibility.
Figure 18. Connecting a DW Device
28