Antenna Or Waul Outuet Cabue To A Vcr - Mitsubishi Electric HD-6000 Owner's Manual

Connecting an Antenna or
Wai Out et Cable to a VCF{ (Audio &
Video)
Antenna or Wal OutJet CabJe to a VCR (Audio & Video)
Figure 5
A two-way RF splitter, 3 coaxial cables, right and left audio cables and a S-Video or Video cables are required, These are not
included with the HDTV receiver/controller,
1. Connect the incoming cabb or Antenna to IN on the RF spltter.
2. Connect one coaxial cabb from OUT on the RF spltter to ANTENNA IN on the VCR back panel.
3. Connect one coaxial cabb from OUT on the RF spltter to ANT-1 MAIN on the HDTV receiver/controler back panel.
4. To use the TV speakers with the VCR, connect a set of audio cabbs from AUDIO OUT on the VCR back panel to
INPUT-1 AUDIO-LEFT (MONO) and AUDIO-RIGHT on the HDTV receivericontroler back panel. The red cable
connects to the R (right) channel and the white cable connects to the L (left) channel. If your VCR is mono (non-
stereo), connect only the white (left) cabb.
5. Connect either an S-Video or Video cable from VIDEO OUT on the VCR back panel to INPUT-1 VIDEO on the HDTV
receiver/controlerback panel Only one type of video cable should be connected. S-Video is recommended, if
avalable.
6. For NetCommand® controlled recordings, connect a set of audio cables from AUDIO IN on the VCR back panel
to MONITOR OUTPUT AUDIO-LEFT (MONO) and AUDIO-RIGHT on the HDTV receivericontroler back panel. The
red cable connects to the R (right) channel and the white cable connects to the L (left) channel.
7. Complete the NetCommand controlled recordings connections by connecting a Video cable from VIDEO IN on the
VCR back panel to MONITOR OUTPUT VIDEO on the HDTV receiver/controler back panel.
Figure 5. Connecting a VCR to an Antenna or Waft Outlet Cab/e
Note: NetCommand® will assume your VCR is connected to inputs as shown on this page. If you use any
other inputs for your VCR or add a second VCR, this change must match in the NetCommand system. See Edit
NetCommand... in Chapter 3 for more information.
2O