Main Menu Choices - Mitsubishi Electric HD-6000 Owner's Manual

Main Menu Choices
Setup Menu
Figure 1
Use the Setup menu to seHect EngHish or Spanish as
the Hanguage for the menus and on-screen dispHays.
Adjust CoHor BaHance Automatically or manually
(PerfectCoHorTM). CoHor BaHance uses six coHors,
Magenta, Red, Yellow, Green, Cyan and BHueto obtain
coHor baHance. Reset the CoHor BaHance to the factory
defauHt setfings.
SeHect the setting for the TV Pause feature. Choose
Side Bar CoHor of bHack or gray. View the HD-6OOO's
software version on this screen.
Figure 1, Main menu, Setup selected
Time Menu
Figure 4
Manually set the time for the HD-6000, or seHect Auto
and the HD-6000 will automatically set the time based
upon Extended Data Service (XDS) time data. This
time data is usually broadcast by your local PBS
station. This menu is also used to set the TV timer.
Figure 4. Main menu, Time selected
Captions Menu
Figure 5
Display Closed Captions if sent by the broadcaster,
select settings for analog or digital captions.
NetOommand® Menu
Figure 2
Add, change, review or delete NetCommand® settings
and devices. If you have more than one digital
recording device connected, use this menu to change
the default digital Record To device. Turn the transport
menu off and change the order of the icons in the
Device Selection menu.
Figure 2. Main menu, NetCommand selected
Figure 5. Main menu, Captions selected
VoChip Lock Menu
Figure 6
Block or allow programing based upon rating signals
sent by the broadcast station or lock by time.
Antenna Menu
Figure 3
Memorize available analog and digital channels for
both Ant-1 and Ant-2. After memorization, if a channel
displays as digital and analog, you can choose to
see the channel digitally every time it is selected.
Manually add or delete channels from memory, name
channels or add your favorite channels to a SQV
(SuperQuickView
TM)
list.
Figure 3, Main menu, Antenna selected
Figure 6, Main menu, V-Chip Lock selected
AudioVideo Menu
Figure 7
Reset the AiV Memory to return to the original factory
AiV settings for a selected device. Customize the
individual audio and video settings.Display a blue
screen when viewing a device with no signal, enhance
the darker parts of bright pictures or adjust the analog
audio output.
68
Figure 7. Main menu, Audio/Video selected