To The Mitsubishi Lto4260 Lcd Tv - Mitsubishi Electric HD-6000 Owner's Manual

Connecting to the Mitsubish LT=4260 LCD TV
Power Connection
Figure 19
TheAC Power cord is provided with the LT-4260,
Connect the AC power cord from the back of the HD-6000 to the back of the LT-4260. Make this connection before
connecting any devices. If you connect new devices after the power is connected, you will need to un@ug and
reconnect the AC power cord.
Figure 19. Power Connection to LT-4260
HDMJ Connection
Figure 20
An HDMI to HDM! cable is required and one is provided,
Connect an HDMJ cane from the HDMI output on the HDTV receiver/controller back paneHto the HDMI/MonitorLink TM
Input on the LT-4260. HDMI devices provide video and audio through this cane.
f
__
@@e
........
Figure 20. HDMI Connection to LT-4260
Authorized Card Reader Connection
Figure 21
A USB A to USB B cable to connect the authorized card readers is provided with the LT-4260,
The USB A connects to the Authorized Card Reader port on the HD-6000. The USB B connects to the Authorized Card
Reader for the HD-6000 port on the LT-4260. You can then use the media card slots on the front of the LT-4260 with
authorized media cards.
USB B
Figure 21. HDM! Connection to LT-4260
29