Mitsubishi Electric HD-6000 Owner's Manual page 47

Edit NetCommand ®, Add an AiM Receiver, continued
Name Screen
Figure 10
The Name screen allows you to change the default
name for the AiV receiver to a custom name of up to
eight characters (incHuding a bHank space), seHecting
from Hetters, numbers, and nine different characters.
Using the HDTV receiver/controller's remote, press
ADJUST • or • to seHect each Hetter, then press
ENTER to move to the next position. Press CANCEL to
delete the current Hetter and move back one character
position. When in the first position, the CANCEL
button will return the name to the default name.
Figure !0. Name screen
Finish Screen
Figure 12
To finaHize your seHections and compHete the A/V
receiver setup, seHect Finish from the Finish screen.
Note: Hfyou connected the audio output of
any device dkectHy to the A/V Receiver, you
must use the "Change" function of the Edit
NetCommand menu and select the device to
assign the correct A/V Receiver input to be
used with each device.
Audio Output to AVR Screen
Figure 11
If you connected the HD-6000 Output to Display to an
AiV receiver, use this screen to select the name of the
analog input you're using on the AiV receiver.
If the AIV receiver also has a digital audio input, then
connect the HD-6000 Digital Audio Output to the AiV
receiver digital audio input.
Note that the HD-6000 Monitor Ouput connection is
only for VCR recording and is not synchronized with
the video display.
Figure 1!, Audio Output to AVR screen
Figure 12, Finish screen
47