Dispjay Monitor With An Ndmj Input; Hdmj Source Device - Mitsubishi Electric HD-6000 Owner's Manual

Connecting HDMI Devices
DispJay Monitor with an HDMI or DVi Input
Figure !6
An HDMI to HDMI or HDMf to DV/ cable is required. An HDMI to HDMI cable isprovided,
1. To connect to an HDMI monitor, connect an HDMI cabHe from the HDMI output on the HDTV receiver/controller
back paneHto the HDMI input on the monitor. HDMI devices provide video and audio through this cabHe.
2a. To connect to a DVI monitor, connect the DVI-to-HDMI came (recommended) (or DVI/HDMI adaptor with an
HDMI came) from the DVI monitor's back paneHto the HDTV receiver/controller's back panel
b. Connect a set of audio caMes from AUDIO OUT on the the DVI device back paneHto the DVI AnaHog Audio input
on the HDTV receiver/controller back panel. The red cable connects to the R (right) channel, and the white
cable connects to the L (left) channel.
NOTE: If you are using a DVIiHDMI adaptor, it is important to connect the adaptor to the DVI side for best performance.
,' i HD u_ ad_ble
Figure 16. Connecting HD-6OOO's HDMI Device Output
HDMI Source Device (CabJe Box, Satellite Receiver, DVD PJayer, Etc.}
Figure !7
An HDM! to HDMI cable is required and one is provided.
Connect an HDMI cable from the HDMI input on the HDTV receiver/controller back panel to the HDMI output on the
source device output. HDMI devices provide video and audio through this cable.
DVD Prayer w_th HDMI output
Figure IZ Connecting the HD-6OOO's HDMI Device Input
27