Table of Contents
Advertisement
Introduction
Overview
The Wireless Routing Center features a wireless Access Point, a four-port LAN
switch and a WAN port, which extend your existing broadband Cable/ADSL
connection. It allows the broadband connection to be shared through either the
IEEE 802.11b Access Point feature or the 10/100Base-TX Ethernet® switch,
which also eliminates the need for an additional hub or switch.
The integrated DHCP server automatically assigns IP addresses to your LAN
devices, and with the built-in Network Address Translation (NAT) function, your
LAN is protected against outside intruders. The router can also be configured to
filter internal access to the Internet. It is designed to provide a reliable Internet
access solution for the corporate environment, the small office and the home user.
Package contents
Refer to the Quick Start Guide for the Equipment checklist. If any of the items is
missing, contact your dealer.
System requirements
Broadband Internet connection using Cable/ADSL modem for Internet
connection
One computer with 10/100Base-T Ethernet card and TCP/IP protocol
installed for initial setup
Internet Explorer 5.0 or higher for Web configuration
Requirement for each computer on the LAN:
— TCP/IP protocol installed
Chapter 1
1-1
Advertisement
Table of Contents
