Table of Contents
Advertisement
AC Power Cord and
Connectors
The power cord's AC input plug must be compatible with the various international
AC power outlets and the cord must meet the standards for the country/region in
which it is used. All cords must meet the following specifications:
Length:
Wire size:
Current rating:
Voltage rating:
Certification agencies
U.S. and Canada:
Europe:
Austria:
Belgium:
France:
United Kingdom:
Australia:
Japan:
In Europe, power cords must be VDE type, H05VVH2-F and two conductor.
For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-
15P (125 V) as designated in the U.S. National Electrical code handbook and the
Canadian Electrical Code Part II.
Minimum 1.8 meters (5.9 ft.)
Minimum 0.75 mm
Minimum 2.5 amperes
125 or 250 VAC
(depending on country/region's power standards)
UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2 two conductor
OVE
Italy:
CEBEC
The Netherlands:
UTE
Germany:
BSI
AS
DENANHO
Appendix C
2
IMQ
KEMA
VDE
C-1
Advertisement
Table of Contents
