Follow the order of 1, 2, 3 as shown in the figure below when you connect the AC
adapter. Reverse the order when you disconnect.
Connecting the Wireless Routing
Center
Prior to connecting the hardware, make sure to power off your Ethernet device,
Cable/ADSL modem and Wireless Routing Center. Then follow the steps below to
connect the related devices.
CAUTION: The computer must be configured properly before connect-
ing to a LAN. Logging onto a LAN using the computer's default setting
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.
Connecting the Wireless Routing Center
2
3
Figure 3-5 Connecting the AC adapter
1
3-5