Table of Contents
Advertisement
User's Manual
Administration Configuration
System Clock
Network administrators may want to synchronize date and time among network
devices. This can be done by synchronizing the local clock to an available NTP
server or manually specifying the date and time in the Wireless Routing Center for
your network.
Option 1: Using an existing NTP server
1. In the Set by field, enable the Network Time Protocol option.
2. In the NTP Server field, enter the IP address of the NTP server.
3. In the Update Interval field, select 1, 2 or 7 days.
4. In the Time Zone field, select a time zone according your geographic
location.
Option 2: Manual setting
1. In the Set by field, enable the Manual Setup option.
2. Type the date and time in their respective fields.
NOTE: Normally, the Administration Configuration Page displays the set
values. It is a good idea to check these values periodically to make sure
they have not been changed. To verify the current time, refer to the
Overview Page.
Management Setup
Username and Password: For administration security, specify the Username and
Password and re-enter the password for confirmation. This setting limits web-
based manager access to users with the correct credentials. By default, the user
name is admin and the password is password.
NOTE: These are to authorize access to the Web Configuration Page of
the Wireless Routing Center. They are different from the user name and
password used to access an Internet Service Provider.
4-30
Advertisement
Table of Contents
