Table of Contents
Advertisement
For Windows 2000
1. From the Start menu, point to Settings and then click Network and
Dial-up Connections.
2. Right-click the Local Area Connection icon and then click Properties.
3. In the General window, highlight Internet Protocol (TCP/IP) and then
click Properties.
4. Enable Obtain an IP address automatically and then click OK.
Figure 3-9 Obtain an IP address automatically
Checking/Renew IP Address under Windows 2000
To check if your network adapter gets an IP address within the DHCP IP pool
range (192.168.10.100 ~ 192.168.10.150 by default) of the Wireless Routing
Center, follow the related description under the Windows XP section. The proce-
dures are the same.
Setting up the Ethernet/Wireless LAN client
3-9
Advertisement
Table of Contents
