Table of Contents
Advertisement
Default values
The table below lists all the Wireless Routing Center's default values. Values that
are not listed are blank. To reset the Wireless Routing Center, refer to the
Default
item in Chapter 2, The Grand Tour.
WAN
WAN/LAN Relation
Protocol
LAN
IP Address
Subnet Mask
DHCP Server Service
DHCP Lease Time
IP Pool Range
Wireless LAN
Access Point Name
Network Name
Channel ID
Do not broadcast SSID
Beacon Interval
RTS Threshold
Fragmentation Threshold
Basic Rate
Supported Rate
Wireless LAN Security
802.1x
WEP Mode
Authentication Mode
MAC Address Access Control
NAT Routing mode
DHCP Client
192.168.10.1
255.255.255.0
enable
72 hours
192.168.10.100~192.168.10.150
WRC-1000_AP
WRC_Network
10
disable
100
2346
2346
1 and 2 Mbps
1, 2, 5.5 and 11 Mbps
Not Used
disable
Open
disable
Appendix A
Load
A-1
Advertisement
Table of Contents
