Accessing Web Configuration Page - Toshiba WRC-1000 User Manual

User's Manual

Accessing Web Configuration Page

NOTE: Connect the computer running WRC Finder to the Wireless
Routing Center by cable. You should not use a wireless connection.
The computer running WRC Finder must be on the same subnet as the Wireless
Routing Center in order to display the Wireless Routing Centers in a list. If you
want to change a setting in a Wireless Routing Center, double-click the Wireless
Routing Center you want to change. Your Web browser will start and display that
Wireless Routing Center's Web Confirmation Page.
NOTE: If you know the IP address of the Wireless Routing Center you
want to set, you can enter http://????????????/ in your Web browser
and go directly to the Web Confirmation Page. (? specifies the IP address
of the Wireless Routing Center. The default value is 192.168.10.1)
1. Follow the steps below to start TOSHIBA WRC Finder.
1) Load the TOSHIBA Wireless Routing Center WRC-1000 Utility CD-
ROM in the set-up computer.
2) Use Windows Explorer to locate and copy the file WRC_FIND.exe to
the computer's hard disk.
4-2
Figure 4-1 Web Browser