User's Manual
6. Click the Edit Profile button and select the Authentication tab.
Place a check mark in the Extensible Authentication Protocol check box.
Select Smart Card or other Certificate for the EAP type.
Click OK.
Click Finish.
Access point
The following is the setting procedure for the access point.
Step 1 Setting the 802.1x function at the access point
Make settings for the 802.1x function.
The following procedure is to enable the 802.1x function. The other settings of the
Wireless LAN page is omitted.
1. Open the default page on the Web.
B-10
Figure B-6 Edit Dial-in Profile window