Filters; Specifying Ip Filter Rules - Toshiba WRC-1000 User Manual

Wireless routing center
Hide thumbs Also See for WRC-1000:
Table of Contents

Advertisement

This setting is used to validate wireless stations by RADIUS servers. Settings
can be made for up to four RADIUS servers.
Enable/Disable: Use the radio buttons to disable or enable validation of wireless
stations by RADIUS servers.
IP Address: Set the IP address of the RADIUS server.
Port: Set the port number of the RADIUS server.
Shared Secret: Set the shared secret of the RADIUS server. The shared secret is a
password for communication between the access point and the RADIUS server.
Time-out: Set a time-out value in seconds. A maximum of five packets can be sent
in the set interval.

Filters

When your Wireless Routing Center operates as a router, the built-in NAT function
provides your LAN with Internet access via the single public IP of the WAN port.
That means all network devices are allowed to access the Internet. Therefore,
network security becomes an important issue and system administrators may need
to build access controls to protect the network.
Filters serve as a basic security measure for your network. When the filter function
is enabled, the Wireless Routing Center inspects all data packets received from the
LAN and determines if packets are allowed to pass through the WAN port. Whether
a packet is allowed to pass through, depends on whether it matches your filter rules
and whether your filter type is Listed Pass or Listed Block.

Specifying IP Filter Rules

NOTE: If you make a mistake in Filter Rules, you might not be able to
access the Internet.
If you are going to specify your filter rules, follow the procedures below:
1. In the General > Filter Type field, select the action (Listed Block
or Listed Pass) to be performed on the IP packets matching your filter rules.
2. In the four filter types, select whether to enable or disable each filter.
3. If a filter is enabled, enter the criteria in the fields provided. Click More to
add more criteria if required. See the next section for more information.
4. Click Apply to register your changes.
Filters
4-23

Advertisement

Table of Contents
loading

Table of Contents