Table of Contents
Advertisement
User's Manual
Access Control
MAC Address Access Control: The Wireless Routing Center also supports
authentication based on the MAC address of a wireless client. If this function is
enabled, the AP will allow association by a client only if that client's MAC address
matches an address in the Allow List.
To enable this function, select Enable option and enter the MAC Address of the
Wireless LAN card in a Wireless LAN station to be allowed access to the Wireless
Routing Center. A MAC address must be entered in 12 digits of hexadecimal,
punctuated by a colon every 2 digits. MAC addresses must be separated by a
comma. Spaces, tabs, and line feed are ignored. Example: 11:22:33:44:55:66,
aa:bb:cc:dd:ee:ff
RADIUS Server
Figure 4-20 Wireless LAN Radius
4-22
Advertisement
Table of Contents
