Table of Contents
Advertisement
User's Manual
Report Log to TFTP Server: Available only in NAT Routing Mode. If available,
it specifies whether to report the firewall event log to your TFTP server. If enabled,
a LAN TFTP Server field is present for you to specify the IP address of the
TFTP server. All the filter logs are sent to the TFTP server although only 32 entries
are displayed in the Activity Log window. (see Status > Log).
NOTE: This function is supported only if the IP address of the TFTP
server and that of the Wireless Routing Center are in the same subnet.
Figure 4-24 Administration Configuration
System Configuration
Firmware Upgrade
This option allows you to upgrade the Wireless Routing Center with new firmware.
After upgrading, your customized configurations will still be effective. Upgrading
does not revert to the default settings. To upgrade, download the firmware file to
your host computer and follow the steps below:
1. In the Locate New Firmware field, click Browse... to locate the
firmware file.
2. Click Upgrade. A message will be displayed advising you to wait a few
minutes. You will return to the Administration page when the process is
complete.
4-32
Advertisement
Table of Contents
