Displaying Logical Drive Information - Fujitsu PRIMERGY RX200 S2 User Manual

4.5.4

Displaying Logical Drive Information

Defined logical drives are displayed at the right of the [Controller View] window, each icon
representing one logical drive (also called Logical Unit or System Drive).
To display information of a specific logical drive, double-click a logical drive icon in the [Controller
View] window.
The following information is displayed.
• Logical Drive
Logical drive number (displayed on the title bar of the window).
• RAID Level / Fault Tolerant
RAID level and applicability of redundancy.
• Optimized for Speed / Optimized for Capacity
Whether the speed set, capacity, or redundancy is optimized.
• Logical Size / Physical Size
Logical and physical sizes of the logical drive.
• Status
Current logical drive's operation status.
The meaning of each status is shown in the table below.
Online
Critical
• Used Array Capacity
Of the physical pack capacity, the capacity occupied by the current logical drive.
Status
Online (normal)
Operating without redundancy
Meaning
Chapter 4 How to Use GAM 45