Fujitsu PRIMERGY RX200 S2 User Manual page 69

Hexad
ecimal
ID Type
notatio
n
403 (0x193) Error
404 (0x194) Error
406 (0x196) Error
411 (0x19B Warn
) ing
412 (0x19c) Warn
ing
413 (0x19d) Warn
ing
425 (0x1a9) Error
426 (0x1aa) Error
427 (0x1ab) Error
Log item
Installation aborted. The configuration
changed while the
system was offline.
Controller firmware A SCSI array controller
mismatch. firmware mismatch
was detected.
WARM BOOT WARM Boot failed.
failed.
Controller entered A SCSI array controller
Conservative Cache is now in Conservative
Mode. Cache Mode.
Controller entered A SCSI array controller
Normal Cache is now in Normal
Mode. Cache Mode.
Controller Device The controller device
Start Complete. started.
Controller Boot A Boot ROM image
ROM Image needs must be reloaded.
to be reloaded.
Controller is using The SCSI array
default non-unique controller uses the
world-wide name. default world-wide
name.
Mirror Race Multiple hard disks
recovery failed. failed.
Description
Shut down the server and
check the hard disk
connections.
Check to see whether the
appropriate hard disks are
installed, and remove
inappropriate hard disks.
(For example, a hard disk
for another system was
installed by accident.)
If the above does not
resolve the issue, recreate
the array configuration
and restore the backup
data.
Replace the baseboard.
Check the log to
determine the abnormal
section.
Not required.
Not required.
Not required.
Replace the baseboard.
Not required.
Take corrective action
using the Multi Dead
function.
B List of GAM Error Codes
Action
69