Fujitsu PRIMERGY RX200 S2 User Manual page 68

Hexad
ecimal
ID
notatio
n
388 (0x184)
389 (0x185)
390 (0x186)
391 (0x187)
395 (0x18b)
396 (0x18c)
397 (0x18d)
398 (0x18e)
68
Type Log item
Error Controller is dead.
System is
disconnecting from
this controller.
Warn Controller has been
ing reset.
Infor Controller is found.
mati
on
Error Controller is gone.
System is
disconnecting from
this controller.
Error Controller is gone.
System is
disconnecting from
this controller.
Infor Controller powered
mati on.
on
Infor Controller is online.
mati
on
Error Controller is gone.
System is
disconnecting from
this controller.
Description
The SCSI array
controller failed.
The SCSI array
controller received a
reset command.
• A new SCSI array
controller was
detected.
• GAM Server
restarted.
• The system was
restarted.
• Power supplied to
the SCSI array con-
troller was cut off.
• The SCSI array con-
troller was removed
from the system.
A new SCSI array
controller was installed.
A SCSI array controller
came online.
• Power supplied to
the SCSI array con-
troller was cut off.
• The SCSI array con-
troller was removed
from the system.
Action
Replace the baseboard.
Because the firmware is
implementing a recovery,
there is no problem as
long as there are no Dead
hard disks.
Not required.
Replace the baseboard.
Not required.
Not required.
Replace the baseboard.