Siemens SIMATIC FS600 Instruction Manual page 6

Table of Contents

About this Instruction Manual

This instruction manual contains information on the proper use and effective applica-

tion of the SIMATIC FS600 Laser Scanner.

WARNING

All the information contained herein, in particular the safety notes, need to be carefully

observed.

Notes regarding safety and warnings are marked by this symbol

Notes regarding important pieces of information are marked by the symbol

References to the safety of laser devices are identified with the symbol

This instruction manual must be stored carefully. It must be available for the entire

operating time.

SIEMENS AG is not liable for damages caused by improper use. Knowledge of

this instruction manual is an element of proper use.

Important note

Safe device operation can only be guaranteed when certified components are used!

The products described herein were developed to take over safety-related functions as

part of a turn key system or machine. A complete safety-related system is usually

equipped with sensors, evaluation units, status controls and incorporates concepts for

safe switch-off procedures. It is the responsibility of the manufacturer of a system or a

machine to ensure its correct overall operation. SIEMENS AG, its local offices and

associated companies (hereafter referred to as "SIEMENS") cannot guarantee for all

features of a turn key system or a machine that was not designed by SIEMENS.

Neither does SIEMENS assume liability for recommendations given in or implied in the

following instruction manual. The following instruction manual shall not be construed as

a new guarantee, warranty or liability claim beyond the general terms and conditions of

SIEMENS.

Reprints and reproduction of this instruction manual as well as communication and

utilization of its content is not permitted without express permission. Noncompliance

patents or design registrations.

Technical Support:

Telephone:+49 (0) 180 50 50 222

Internet:www.siemens.com/automation/service&support

Subject to change without prior notice.

Warning

Dangerous electric voltage! Electric voltage can cause elec-

tric shock and burns. Before commencement of work you

therefore need to turn the system/device power off.

Table of Contents