Brother DCP-8085DN Service Manual page 138

(11) General communications-related
Code 1
B0
B0
B0
BF
BF
BF
* Establishment of FAX communication:
FAX communication is established when the calling station receives a DIS
(reception capability) signal from the called station and the called station receives a
NSS or DCS (communications test) signal from the calling station.
(12) Maintenance mode
Code 1
E0
E0
(13) Equipment error
Code 1
FF
Code 2
02 Unable to receive the next-page data.
Unable to receive polling even during turn-around
03
transmission due to call reservation.
04 PC interface error.
Communication canceled by pressing the Stop/Exit
01
button before establishment of FAX communication*.
Communication canceled by pressing the Stop/Exit
02
button after establishment of FAX communication*.
Transmission canceled due to a scanning error caused
03 by no document or document feed problem in ADF
scanning in real time transmission.
Code 2
01 Failed to detect 1300 Hz signal in burn-in operation.
02 Failed to detect PB signals in burn-in operation.
Code 2
Equipment error
X X
(For X X, refer to
3-66
Causes
Causes
Causes
"2.1 ERROR INDICATION")
Confidential