Pan-Nordic Select Country (Function Code 52) - Brother DCP-8085DN Service Manual

4.13 Pan-nordic Select Country (Function code 52)

<Function>
This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.
Note:
• This function is applicable to "France and surrounding countries", "Pan-Nordic",
"Oceania" and "Iberia" areas only.
<Operating Procedure>
(1) Press the [Menu], [Black Start] and [Menu] buttons in this order in the ready state.
The "0" will appear on the LCD.
(2) Press the [5] and [2] keys in this order.
The "Set Country" will appear on the LCD, and the country name will appear on the LCD.
Note:
• The country name indicated on the LCD varies depending on the area (code input in
Function code
France and
surrounding
countries
France
België / Belgique New Zealand
Nederland
-
-
(3) Press the [
Press the [OK] button while the country name is being indicated.
(4) The "1.Yes, 2.No" will appear on the LCD. Press the [1] key when it is good in the
displayed country.
The EEPROM is customized, and the machine returns to the ready state.
Press the [2] key when it is mistake in the displayed country. Return to the procedure (3)
and enter the country again.
74) as shown in the table below.
Oceania
Australia
-
-
-
] or [ ] button to display the country name where the machine is used.
Pan-Nordic
Norge
Suerige
Suomi
Danmark
Others
7-23
Iberia
España
Portugal
-
-
-
Confidential