Brother DCP-8085DN Service Manual page 497

<WSW56>
Selector No.
PS emulation function setting
1
(Not used.)
2 Switching of the PPT setting
"Last Job Reprint" function
3
setting
4 Wireless LAN function
Switching of the echo
5 suppression improvement
during calling
Switching of the display for the
6
coverage of toner cartridge
7 PCL emulation function setting
Switching of the CPU sleep
8
mode
• Selector 3: "Last Job Reprint" function setting
Setting this selector to "0" makes the machine not to reprint the "Last Job Print" data such
as confidential document in order to prevent the misuse.
• Selector 4: Wireless LAN function
To disable the wireless LAN (WLAN) functions, set this selector to "1" and turn the machine
power off and then on.
• Selector 5: Switching of the echo suppression improvement during calling
To suppress the echo during calling, set this selector to "0". The default value is "0:Enable".
• Selector 6: Switching of the display for the coverage of toner cartridge
This selector specifies the display for the coverage of toner cartridge. Setting this selector
to "0", the machine displays the coverage only for the current toner cartridge. If this selector
sets to "1", the machine displays the coverage for all toner cartridge which had been
consumed.
• Selector 7: PCL emulation function setting
This selector is applicable to models equipped without PCL emulation.
• Selector 8: Switching of the CPU sleep mode
This selector specifies the CPU sleep mode ON or OFF.
Function
App. 1-63
Setting and Specifications
0: Invalid 1: Valid
0: Invalid 1: Valid
0: Invalid 1: Valid
0: Enable(default)
1: Disable
0: Enable 1: Disable
0: The coverage only for the current
toner cartridge
1: The coverage for all toner
cartridges which had been
consumed
0: Invalid 1: Valid
0: Invalid 1: Valid
Confidential