Brother DCP-8085DN Service Manual page 299

(2) Disconnect the connector of the USB HOST harness ASSY from the USB HOST PCB
ASSY.
(3) Remove the bind B M4x12 Taptite screw, and remove the USB HOST FG harness.
(4) Remove the bind B M4x12 Taptite screw, and remove the USB PCB holder from the joint
cover ASSY.
Taptite bind B M4x12
USB HOST FG harness
USB HOST harness ASSY
Joint cover ASSY
(5) Remove the cup S M3x6 SR Taptite screw, and remove the USB HOST PCB ASSY
from the USB PCB holder.
USB HOST PCB ASSY
Taptite bind B M4x12
Fig. 5-126
USB PCB holder
Taptite cup S M3x6 SR
Fig. 5-127
5-99
USB PCB holder
Confidential