Adf Unit - Brother DCP-8085DN Service Manual

9.8

ADF Unit

(1) Remove the four cup S M3x6 Taptite screws, remove the two FG harnesses and then
remove the Shield cover ASSY.
Taptite cup S M3x6 SR
Seal
Taptite cup S M3x6 SR
(2) Remove the cup S M3x6 Taptite screw, remove the ADF FG harness and FB FG
harness.
(3) Disconnect the Connector from the Driver PCB.
(4) Disconnect the two Connectors from the Main PCB.
<Left side>
Connector
(ADF motor harness)
ADF FG harness
FB FG harness
Taptite cup S M3x6
Connector
(FB cover sensor)
Connectors
(ADF relay harness)
FG harness
Shield cover ASSY
FG harness
Fig. 5-34
Main PCB
Fig. 5-35
5-47
Driver PCB
Main PCB
Confidential