Earth Spring - Brother DCP-8085DN Service Manual

9.18 Earth Spring

(1) Turn the Exit chute cover ASSY upside down. Remove the Earth spring from the Exit
chute cover ASSY.
Earth spring
Exit chute cover ASSY
Antistatic brush
Fig. 5-49
Assembling Note:
• When assembling the Earth spring, ensure that the end of the Earth spring is
attached onto the Antistatic brush as shown in the figure below.
Antistatic brush
Earth spring
Hooks
Exit chute cover ASSY
Earth spring
Antistatic brush
Hook
Rib
Fig. 5-50
5-55
Confidential