Ps Pcb Unit - Brother DCP-8085DN Service Manual

9.81

PS PCB Unit

(1) Turn the Printer upside down.
(2) Remove the Screw pan (S/P washer) M3.5x7.5SR, and remove the NCU FG harness.
(3) Remove the five bind B M4x12 Taptite screws, and then remove the Base plate LV.
(4) Remove the Screw pan (S/P washer) M3.5x7.5SR from the Base plate LV to remove the
PS PCB unit terminal.
Screw pan (S/P washer) M3.5x6
NCU FG harmess
Base plate LV
<Back side>
Assembling Note:
• When assembling the Base plate LV, Direct the cable side of the PS PCB unit terminal
to the backward, and align parallel the PS PCB unit terminal with the side of the Base
plate LV.
Taptite bind B M4x12
Screw pan (S/P washer) M3.5x6
Fig. 5-166
5-124
PS PCB unit terminal
Confidential