Function Setting; Pc Print Function (Function Code 43) - Brother DCP-8085DN Service Manual

4.11 PC Print Function (Function code 43)

<Function>
This function allows the machine change that the setting of each PC printing function
indicated to the following function settings.
<Operating Procedure>
(1) Press the [4] and [3] keys in this order in the initial stage of the maintenance mode.
The "Manual Feed" will appear on the LCD.
(2) Press the [
button.
(3) When select the unchanging (On/Off) parameter, press the [
the parameter using the numeric keys. And press the [OK] button.
(4) If press the [Stop] button, the machine will return to the initial stage of the maintenance
mode.

■ Function setting

LCD indication
Manual Feed
Resolution
Toner Save
Density
Job Cancel
TimeOut
Sleep Time
Pege
Protection
Emulation
Auto I/F Time
Media Type
Paper(Size)
Copies
Orientation
P-Pos X-Offset Switching of the offset print position
P-Pos Y-Offset
AutoFF
] or [ ] buttons to select the function you want to set and press the [OK]
Description
Switching of the Manual Feed
Resolution to print
Switching of the Toner Save
Switching of the Density level
Setting of the time until the host
time-out at the Job Cancel
Setting of the time until enter the
Sleep Mode
Switching of the protection of the
page memory
Switching of the emulation
Switching of the I/F open time
Switching of the recording paper
type
Switching of the area of develop the
image
Switching of the print copies
Switching of the print direction
of the landscape orientation
Switching of the offset print position
of the portrait orientation
Switching of the auto form feed
On/Off
300/600/1200dpi
On/Off
-6 to 6
2 to 225 (seconds)
0 to 99 (minutes)
Off/Letter/A4/Legal/Auto
Auto/HP/PS
1 to 99 (seconds)
Thin/Plain/Thick/Thicker/
Trancparency/Recycled/
Bond/Envlopes/EnvThin/
EnvThick
Letter/Legal/A4/
Executive/B5/JISB5/A5/
B6/A6/Monarch/C5/
COM10/DL/DLL/
A4Long/PostCard/Folio
1 to 99 (pages)
PortLait/Landscape
-500 to 500 (1/300dpi)
-500 to 500 (1/300dpi)
On/Off
7-19
] or [ ] button, or change
Initial
Set value
value
Off
600
Off
Off
Auto
Plain
Letter
Portlait
Off
Confidential
0
4
5
5
1
0
0