Brother DCP-8085DN Service Manual page 82

Error
Problem
codes
Fax paper setting mismatch
(The setting paper bexomes
7F
besides the A4/Letter/Legal/
Folio) (Not applicable)
Fax paper size is incorrect (The
paper is smaller 10mm than the
80
letter size (11inch) in Fax List/
Report)
Discharge detection error (Unable
to print after the discharge
detection error until Drum Unit is
replaced.) (Discharge detection
83
error occurs when the machine
detects the drum discharge with
Drum life reaches more than twice
the standard Drum Life.)
Paper jam
84
Tray 1 is not installed into the
85
machine
Tray 2 is not installed into the
86
machine
Paper jam inside the machine
88
Incorrect paper size in duplex
89
printing
Paper jam in Tray 1
8A
Paper jam in Tray 2
8B
8C Paper jam in MP Tray
8D Paper jam near eject tray
Specified paper size is not
99 supported for duplex printing
(DX)
9D Not used
Paper empty
9F
A1 Front cover opened
During scanning, 90 cm or longer
A2
of a document is detected
Document rear sensor is not
A3 turned on when feeding the
document
ADF cover opened
A4
(Not applicable)
A5 Fax scanning error (Warning)
Fax scanning error (Error)
A6
Scanning color parameter file
A7 failure
Refer Error
to: codes
Scanning color parameter
matching miss
3-23 A8
DMA transfer error
3-23 AD
CCD unit home position sensor
is not turned on.
3-23 AE
CCD unit home position sensor
3-24 AF
is not turned off.
Scanning FFC detection error
3-24 B0
Dark level offset data level error
3-24 B1
for scanning
Gain control data level error for
3-25 B2
scanning
A/D converter standard voltage
3-25 B7
failure; at High side
A/D converter standard voltage
3-26 B8
failure; at Low side
Scanning light adjustment error
3-26 B9
is detected
3-26 BB White level data error
3-27 BD Black level data error
ADF duplex scanning cannot be
3-27 BF implemented due to too long
document
C0 New toner detection lever failure
Run out of memory for data
3-28 C7
expansion of PC printer
3-28 C8 Secure print data full
DIMM error
3-29 C9
Excess current to USB device
3-29 CA
Drum unit is not installed into the
3-29 CD
machine
3-30 D1 Modem initialization failed
Fuser error other than 58, 59,
3-30 DD 68, 69, 6A, 6B, 6C, 6D, 6E, 6F,
76, 78, DE and E2 are occurred
Central temperature of heat
3-30 DE roller detected the temperature
that was lower than edge (60?C)
3-10
Refer
Problem
3-30
3-31
3-31
3-31
3-32
3-32
3-32
3-32
3-32
3-33
3-33
3-33
3-33
3-34
3-34
3-34
3-35
3-35
3-35
3-36
3-36
3-36
Confidential
to: