NEC Xen IPK Installation Manual page 42

June 2004
36 - Chapter 3
To change the remote access default logon name and password,
continued
1 Press F8 and follow the on-screen instructions to change the password.
2 Press F10 and type
3 Press F11 to exit the Script File Generator utility.
4 End the remote access connection.
5 From the CoSession Remote Viewer Control Center window on the
support computer, confirm that the same phone book entry used to
connect to the voice messaging system in step 1 is displayed in the
"Name" field.
6 Choose "Setup" next to "Terminal type."
7 In the CoSession Remote Viewer Setup window, type the new logon
name and password.
8 Choose "Save," then choose "Close."
9 To change security settings on the remaining direct.cs2 or modem.cs2
script file on the voice messaging system and the support computer,
repeat steps 1 through 16 using the phone book entry for the alternative
connection type.
If you do not already have a phone book entry set up to access the same
voice messaging system using an alternative connection type, see the
procedure, "To add a phone book entry" on page 12 to do so.
Avoid changing the Direct.cs2 and the Modem.cs2 script files during
CAUTION:
the same remote access session because you may lose the ability to
access the voice messaging system application using remote access
software.
to save your changes.
y
NEC Business Solutions Ltd
Remote Access