Using Telanophy Applications With Wans And The Internet - NEC Xen IPK Installation Manual

June 2004
S 14
E C T I O N
U T LAN
SING E OPHY
APPLICATIONS WITH
WAN
S AND THE
I
NTERNET
84 - Chapter 6
TeLANophy clients or workstations can use TCP/IP to run TeLANophy
applications over the Internet or a wide area network (WAN). The following
conditions are required to establish a TCP/IP connection between a remote
workstation and the voice messaging system:
• The workstation is connected to the voice messaging system through a WAN,
dial-up Internet service, or dedicated Internet connection.
• The network administrator has configured the network to allow for remote con-
nections.
• TeLANophy uses TCP port 1024. You need to know the TCP/UDP port to allow
access through a firewall.
After these requirements are met, the workstation can access the voice
messaging system as it would any other Internet service.
To set up a workstation for a WAN or Internet connection
1 From the workstation, connect to the WAN or Internet service provider,
using TCP/IP as the network protocol.
2 After the connection between the workstation and host is established,
open the desired TeLANophy application.
NEC Business Solutions Ltd
Setting Up TeLANophy