Tcp/Ip For Windows 98 Or Later - NEC Xen IPK Installation Manual

Xen IPK Xen Mail CTI Installation Guide
S 7
E C T I O N
TCP/IP W
FOR INDOWS
98
OR LATER
Setting Up TeLANophy
Perform the following procedure to set up Windows 98 or later workstations
that use TeLANophy applications with
TCP/IP.
To set up a Windows 98 or later workstation
1 From the Windows taskbar, choose "Start," choose "Settings," and then
choose "Control Panel."
2 In the Control Panel, double-click "Network."
3 In the Configuration tab, check whether
"TCP/IP protocol" is listed. Then choose the appropriate scenario:
• If it is listed, choose "Cancel."
• If it is not listed, choose "Add," then follow the on-screen instructions
to install the driver from your Windows.
Next Step:
OS/2 Warp documentation
Chapter 6 - 77