NEC Xen IPK Installation Manual page 65

Xen IPK Xen Mail CTI Installation Guide
Backing Up & Restoring the System
9 At the Serial Port Configuration menu, select one of the following:
• 1 and press ENTER for "Select serial port."
• 2 and press ENTER for "Change baud rate."
These settings must match the host's BRFT serial port settings.
NOTE:
10 To save the new serial port settings for future BRFT connections, type 3
to save the settings. Otherwise, these settings are only valid for this
connection.
11 Type 4 to return to the BRFT Connection menu.
After 2 minutes of inactivity, the host utility will end the connec-
NOTE:
tion.
12 At the BRFT Connection menu, type 1 for a modem connection or
type 2 for a direct connection.
13 If prompted, type the voice messaging system's phone number and
press ENTER.
14 Follow the on-screen instructions until the main menu appears.
15 At the main menu, type 2 to transfer the restore files.
16 Follow the on-screen instructions to complete the transfer.
17 Exit the BRFT remote software.
18 With Windows Remote, establish a remote access connection.
19 Shut down the voice messaging system application.
20 At an OS/2 command prompt, change to the E:\Vmail directory.
21 Type vmrestor and press ENTER.
22 Follow the on-screen instructions to restore the system files.
Several times during the restore process, you may be asked to
NOTE:
overwrite files. Type y and press ENTER for each occurrence,
and continue.
23 Restart the voice messaging system application.
Chapter 4 - 59