NEC Xen IPK Installation Manual page 98

June 2004
92 - Appendix B
To shut down and restart the voice messaging system
1 Shut down the voice messaging application by pressing ESC at the
Banner screen and then following the system prompts.
CAUTION If you set the Shut down switch OFF before exiting the application, the sys-
tem will not wait for a call to finish before disconnecting all lines.
2 Locate the Shutdown switch on the voice messaging system board and
set it Off. The system automatically exits the voice messaging application
(if open), shuts down OS/2, and turns the board's power off.
CAUTION If the Shut down switch is already set OFF, go to an OS/2 command
prompt, type shutdown and wait for the shutdown to finish. Then push the Power but-
ton.
3 Restart the voice messaging system by setting the Shutdown switch On
and then pressing the Power button.
NEC Business Solutions Ltd
Starting and Shutting Down the System