Specifying Station Numbers For Vewcall Plus - NEC Xen IPK Installation Manual

Xen IPK Xen Mail CTI Installation Guide
S 3
E C T I O N
S
PECIFYING STATION
NUMBERS FOR
V C P
EW ALL LUS
Setting Up TeLANophy
For ViewCall Plus to work correctly, the phone system's station numbers
must be entered into the voice messaging system.
To specify station numbers in the voice messaging system
1 Go to line 7 on Application screen page 1.
2 In the "Station numbers" field, enter the phone system station numbers
that are connected to the voice messaging system ports.
APPLICATION SCREEN PAGE 1
»1. Ans 5. Ans
2. Ans 6. Dial
3. Ans 7. A/D
4. A/D 8. Msg
E A S Y M A D E A P P L I C A T I O N
1. Site name: Organisation's name
2. Contact: Organisation's system manager
----------------------------- Calls Answered ---------------------------------
3. Total trunks/stations: 12 / 24
4. Day calls answered: All trunks
5. All ports busy action: Ring-until-answered
----------------------------- Access Numbers ---------------------------------
6. Trunk pilot #: 555-555-5555
Alternate trunk #s: 800-555-5555
7. Port stations Pilot #: 500
Station numbers: 500-508
Port station numbers Accepts the extension number of each phone system line that is connected to
a voice messaging port, in ascending order, separated by commas. If the numbers are sequential, type
a range separated by a hyphen.
10:30am DAY 20-Aug-02
INSERT
Recording Time: 112:12
System manager
Page 1 of 12
Phone#: 555-555-5555
Calls/day: 500
Night calls: All trunks
# of trunks answered: 12
Chapter 6 - 73