Tcp/Ip For Windows 2000 - NEC Xen IPK Installation Manual

Xen IPK Xen Mail CTI Installation Guide
S 9
E C T I O N
TCP/IP
FOR
W 2000
INDOWS
Setting Up TeLANophy
Perform the following procedure to set up Windows 2000 workstations that
use TeLANophy applications with TCP/IP.
Administrative rights are required for setting up a Windows 2000
workstation. Without administrative rights, an error message appears
explaining that you have insufficient rights for changing settings.
To set up a Windows 2000 workstation
1 From the Windows taskbar, choose "Start," choose "Settings," and then
choose "Control Panel."
2 In the Control Panel, double-click "Network and connections."
3 Right-click "Local area connections." On the Shortcut menu, click
"Properties."
4 In the Local area connections dialogue box, click "Install" and choose
"Protocol."
5 Click "Add" and click "TCP/IP."
6 Click "Add."
Chapter 6 - 79